Base metal safe
Removes paint without attacking steel, cast iron, or aluminium
Surface Prep · Process-engineered chemistry
UNIKSTRIPPaint & Scale Stripper
Rework Rejected Parts Without Abrasive Blasting
pH 13–14Powder Coat StripBase Metal SafeJig Cleaning
01 / Product brief
Rework Rejected Parts Without Abrasive Blasting
High-pH alkaline paint and scale stripper for rework of miscoated, over-cured, or defective painted components. Saponifies and lifts cured powder coat, liquid paint, and epoxy primer without attacking the base metal. Designed for tank or spray application at 60–80°C on steel, cast iron, and aluminium substrates.
Selective chemistry saponifies organic coatings while leaving base metal intact — avoids abrasive methods (shot blast, grit blast) that can stress-relieve heat-treated parts or alter surface roughness. Single-tank immersion strips complex geometries including blind holes and internal passages.
02 / Performance
Key process advantages
Product-specific outcomes for production quality, operating control and line performance.
Strips complex geometries
Immersion process cleans blind holes and internal passages
Jig and hook cleaning
Removes built-up paint from production fixtures and conveyor hooks
04 / Process position
Where it works in the line
Used as a pre-treatment Stage 0 for rework — strips existing paint or scale before re-entering the standard degrease → de-rust → phosphate sequence.
- 01
Degrease
Used as a pre-treatment Stage 0 for rework — strips existing paint or scale before re-entering the standard degrease → de-rust → phosphate sequence.
- 02
Rinse
Process stage
- 03
De-rust
Process stage
- 04
Rinse
Process stage
- 05
Condition
Process stage
- 06
Phosphate
Process stage
- 07
Passivate
Process stage
- 08
Rinse
Process stage
- 09
Dry
Process stage
05 / Applications
Specified for real production demands
Typical applications and substrate conditions for UNIKSTRIP.
Rework of over-cured or defective powder-coated steel components
- Steel
Paint stripping on rejected automotive parts before re-treatment
- Cast Iron
Scale and carbonaceous deposit removal from production jigs and hooks
- Aluminium
Stripping of liquid epoxy primer from failed or mis-painted fabrications
- Production Jigs
Technical support
Validate UNIKSTRIP on your line.
Share your substrate, current bath, throughput and finishing system. Our process team will recommend a practical trial window.