pH 11–13 high-alkali formula
Removes polymerised rust-preventive oils that standard cleaners miss
Surface Prep · Process-engineered chemistry
UNIKLEAN SPDegreasing SP
Heavy Stamping Oils Removed in a Single Pass
pH 11–13High Oil LoadHot ProcessFerrous / Non-Ferrous
01 / Product brief
Heavy Stamping Oils Removed in a Single Pass
Heavy-duty alkaline degreaser (pH 11–13) formulated for removal of heavy forming oils, stamping lubricants, neat cutting oils, and anti-rust compounds from ferrous and non-ferrous metal. Elevated pH and temperature emulsify oil loads that defeat standard-duty degreasers used in typical pre-treatment lines.
Heavy-duty formulation handles multi-layer oil loads — including polymerised rust-preventive oils — that cause incomplete degreasing and subsequent phosphating failures in standard alkaline cleaners. Designed specifically for single-stage heavy-soil removal.
02 / Performance
Key process advantages
Product-specific outcomes for production quality, operating control and line performance.
Prevents phosphating failure
Incomplete degreasing is the leading cause of phosphate skip and poor coating
Works on ferrous and non-ferrous
Single degreaser for mixed-substrate production lines
04 / Process position
Where it works in the line
Applied at Stage 1 (Degrease) — removes heavy forming oils, stamping lubricants, and rust-preventive compounds that cause phosphate failure when left on the surface.
- 01
Degrease
Applied at Stage 1 (Degrease) — removes heavy forming oils, stamping lubricants, and rust-preventive compounds that cause phosphate failure when left on the surface.
- 02
Rinse
Process stage
- 03
De-rust
Process stage
- 04
Rinse
Process stage
- 05
Condition
Process stage
- 06
Phosphate
Process stage
- 07
Passivate
Process stage
- 08
Rinse
Process stage
- 09
Dry
Process stage
05 / Applications
Specified for real production demands
Typical applications and substrate conditions for UNIKLEAN SP.
Automotive stamped steel parts with heavy stamping oil from deep-draw operations
- Ferrous Metals
Machined components with neat cutting oils and metalworking fluids
- Non-Ferrous Metals
Castings with mould release agents and graphite lubricants
- Castings
Heavy-duty fabricated components entering a phosphating line
- Automotive Stampings
Technical support
Validate UNIKLEAN SP on your line.
Share your substrate, current bath, throughput and finishing system. Our process team will recommend a practical trial window.